| 259 | Observations of native oxides on ion beam polished heterogeneous Cr–Mo weld TEM foil specimens Karl Dawson and Gordon J. Tatlock |
| |
| 264 | Measurement of Young’s modulus of oxides at high temperature related to the oxidation story Isao Saeki, Takuto Ohno, Daigo Seto, Ofuyu Sakai, Yusuke Sugiyama, Tadao Sato, Akira Yamauchi, Kazuya Kurokawa,Mikako Takeda and Takashi Onishi |
| |
| 269 | Oxide scale formation and morphology on austenitic stainless steel at medium annealing temperatures G. Green and R.L. Higginson |
| |
| 274 | Evolution of the metal–oxide interface during the initial stage of the high temperature oxidation of ferritic stainless steels Jerome Issartel, Se¤bastien Martoia, Frederic Charlot, Valerie Parry, Yves Wouters and Alain Galerie |
| |
| 279 | The effect of alloying additions on the oxide morphologies of super-heater tubes at elevated temperatures R.L. Higginson, L. Millar, G.West and J. Hulance |
| |
| 285 | Microstructural analysis of oxide layer formation of ferritic stainless steel interconnects Dong-Ik Kim, Seung Hee Hong, Madakashira P. Phaniraj, Heung Nam Han, Jae-Pyoung Ahn and Young Whan Cho |
| |
| 290 | Review of factors affecting steam oxidation testing A.T. Fry and E.M. Piedra |
| |
| 297 | Oxidation of Fe–Si alloys in CO2–H2O atmospheres Huan Li, Jianqiang Zhang and David J. Young |
| |
| 302 | The influence of platinum on the oxidation and sodium sulfate induced hot corrosion of NiAl diffusion coatings H. Lai, P. Knutsson and K. Stiller |
| |
| 309 | Performance of thermal barrier coatings in industrial gas turbine conditions Maud Seraffon, Nigel J. Simms, John R. Nicholls, Joy Sumner and John Nunn |
| |
| 315 | The CaSO4 phase in fully infiltrated electron-beam physical vapour deposited yttria stabilized zirconia top coats from engine hardware W. Braue, P. Mechnich and P.W.M. Peters |
| |
| 324 | Oxidation behaviour of TiAlYN/CrN and CrAlYN/CrN nanoscale multilayer coatings with Al2O3 topcoat deposited on -TiAl alloys R. Braun, A. Lange, P.Eh. Hovsepian, A.P. Ehiasarian, R. Tietema and C. Leyens |
| |
| 336 | Oxygen influenced intergranular crack propagation: analysing microstructure and chemistry in the crack tip region L. Viskari, S. Johansson and K. Stiller |
| |
| 342 | High-temperature oxidation of FeCrAl(Y, Pt) alloys in oxygen–water vapour Tadaaki Amano |
| |
| 349 | Photoelectrochemical investigations on individual ferritic and austenitic grains of a duplex stainless steel oxidized in water vapour A. Srisrual, J.-P. Petit, Y. Wouters, C. Pasca and A. Galerie |
| |
| 355 | Microscopical investigation of steamside oxide on X20CrMoV121 superheater tubes Melanie Montgomery, Anette N. Hansson, S_ren A. Jensen and Tommy Vilhelmsen |
| |
| 361 | Microstructural characterization of oxide scales formed on steels P91 and P92 E.O. Mogire, R.L. Higginson, A.T. Fry and R.C. Thomson |
| |
| 369 | High temperature oxidation and corrosion of gas turbine component materials in burner rig exposures Joy Sumner, Adriana Encinas-Oropesa, Nigel J. Simms and John E. Oakey |
| |
| 377 | Scaling and internal oxidation of -CuSn alloy Megha N. Dubey, Samuel Jouen, Xavier Sauvage, Beatrice Hannoyer |